|
Written by Nick Bailey
|
|
Monday, 21 June 2010 07:03 |
|
Top news people. The first batch have come off the CNC.
They will be available to buy before the week is through.
Here's a sample. The angles of the bends may not be correct in this picture as this has been bent up without access to the car to trial fit.
OLD NEWS
Templating has been going well to design a mk2 MX5 aluminium slam panel.
After 3 attempts we are finally at a design which is going to work very well and look the part too.
Aluminium Sheet is in stock also, so machining of these panels should take place this week.
Heres a taster of the prototype (made from dibond):
|
|
Last Updated on Thursday, 22 July 2010 18:09 |
|
|
Written by Nick Bailey
|
|
Thursday, 08 July 2010 10:58 |
|
The LED TSI's have been available for some time and there are around 50 sets fitted to MX5's.
It was inevitable that eventually a set or 2 would be put through an MOT test.
The great news is that 2 sets have been MOT'd and both sets have passed with out a mention. |
|
Last Updated on Thursday, 08 July 2010 11:03 |
|
Written by Nick Bailey
|
|
Friday, 14 May 2010 10:53 |
|
Mazda MX5 Polycarb Quarterlight windows are now available in store!
Stock levels are very low with these, but they will keep coming. Available as vented or standard replacement.
Coming within the next couple of months we will have a few more products available.
For the Mk1 MX5 - foamex replacement door panels.
Mk2 MX5 - Ali Slam Panels.
And maybe some TSI's to suit the Nissan 200sx S13.
|
|
Last Updated on Tuesday, 25 May 2010 22:06 |
|
|
Out of Stock :( or maybe not.... |
 |
 |
 |
|
Written by Nick Bailey
|
|
Monday, 24 May 2010 12:18 |
|
Aluminium Arrival
Slam panels will be back within the week I hope. Mk1 and Mk2 mx5 ones.
Stock is back in!
Vented Polycarb Windows for the MX5 are now back in stock. Only 4 sets though so get em while they're hot :) Only a couple left now :)
Illuminated TSI's have sold out until next week now. The demand for these things is incredible. |
|
Last Updated on Monday, 21 June 2010 07:02 |
|
Written by Nick Bailey
|
|
Friday, 07 May 2010 09:17 |
|
And there we have it. Brushed Ali Slam panels.
I've bled to bring you these.. and i mean real blood!! But now they all come deburred. Shame they dont come off of the CNC like that! |
|
Last Updated on Sunday, 09 May 2010 18:52 |
|
|
|
|
|
|
Page 1 of 2 |
