Home > Shop > Engine Management >

ME221 Mazda MX-5 NB 99-00 Plug-n-Play ECU



 
Our Price: £645.00 Inc VAT

Quantity in Stock:1999
Availability:: Usually Ships in 24 to 48 Hours
Product Code: ME2219900


ECU extras:
add Intake Air Temperature Sensor [Add £24.00]
add Boost Solenoid [Add £50.00]
RS232 Tuning cable [Add £23.94]

Qty:  
Description
 

The ME221 MX-5 PnP is a plug-n-play Engine Management System from Motorsport Electronics for the 1999-2000 Mk2 (NB) Mazda MX-5.

Every major and respected MX-5 Tuner in the UK now uses and recommends the ME221 Engine Management System over other systems

Skuzzle Motorsport - review from MX5Nutz
"I have just spent the last few weeks playing with the fairly recently released Motorsport Electronics ME221 pnp ecu and finally after years of supplying, fitting, mapping MegaSquirt of all shapes and sizes, I am proud to announce that from this day on, my ECU of choice for most MX5 applications is now the ME221."

It supports the 1.6 and 1.8 model from the same hardware, and also fits the OEM case, which means the conversion installs tidily into the OEM position.

  • Uses the ME221 ECU Core (Freescale Automotive Processing Power)
  • Supports all factory sensors.
  • Truly Plug-n-Play : Supports both switched TPS and linear TPS conversions.
  • 16x16 Fuel and Ignition Tables (with dual table switching)
  • VE based fuelling algorithm.
  • Run any type of high impedance injectors.
  • DSP Knock Control
  • in-built 21psi MAP sensor (or use your factory AFM)
  • Closed Loop Boost Control
  • Launch Control
  • Map switching
  • Fully Sequential Injection
  • In the field regular FW updates and improvements
  • Uses the powerful MEITE tuning studio.
  • An open approach to firmware/software features.
  • Supplied with rolling road certified and developed base maps for either turbo or NA setups.
Package contents:
  • ME221 PnP Core Board
  • Vacuum Hose
  • Stickers
  • USB Dongle with a selection of OEM and Turbo basemaps (both 1.6 and 1.8), tuning software and manuals.
If you wish to run forced induction without a MAF sensor, then you will need to install an Intake Air Temperature Sensor - available in the options list.

For ECU controlled closed loop boost control please add the boost solenoid from the options list.

Please note that you can use the stock air intake temperature sensor but being a push fit type it can be blown out with boosted applications so we recommend using the additional sensor that we can supply and installing a threaded boss for fitment.


Share your knowledge of this product. Be the first to write a review »